Pioneering Hoist Solutions with RSS Multipoint 提升 Beams

吊梁 作为…的有效替代者 传播酒吧起重机 梁, which are more compatible for headrooms with limited heights. 归类于起重配件, they are particularly designed to provide support for heavyweight objects, 主要在室内使用. If your company deals with constant lifting of various loads with and without help of 起重机吊具酒吧, this device is particularly designed for such needs. Our goal is to meet all your requirements; contact us for 多提振梁 customization up to 100 tons capacity and adjusting other specifications such as top lifting gears, 钢索和吊链.


多吊梁 在中心提供单点附件, 称为附件包, which is located on the top side of the lifting beam. 在这下面 低净空升降梁, several points are designed f或者一个ttachment to the load; this engineering helps equal distribution of the weight, hence providing a balanced lift of suspended loads. Such weight distribution also decreases the chances of accidental dismantling, which could cause health related injuries and financial losses.

的 多功能多点升降梁 design facilitates even lifting by distributing the load weight across the beam with the help of 提升机分布梁 钩子. 的 lifting lugs that are located underneath the beam add to the structural support while handling a load, 特别是在脆弱的自然环境中. 的se lugs are connected with a hook that is highly compatible with standardized 操纵机梁 附件.

这里有一些类型 通用的吊梁 used across several industries, for various complex rigs;

  • Diverse attachment points to facilitate different load sizes
  • Enhanced adjustability and flexibility to cater for off center load lifting
  • 提升 Beams with two top lifting hoists and a single central lower part as lifting point, 也被称为倒立吊梁. 的se varieties are used for turning twocrane 钩子 into one load lifting point in case of heavier lifting occasions.
  • 多点吊钩起升梁 additions with crane hook for direct attachment to the load, often sided with shackle fastening

“An Illustration of our 18 Ton Multi Point Spreader Beam Model”


不像 起重机传播酒吧 梁, 多提振梁s can directly convert a change in load pressure into facilitated bending on the beam without the use of top rigging. Such features make load adjustments and carrying much easier in low head room positions. This capability is also greatly helpful while handling and lifting loads that call f或者一个dditional support, 比如形状奇特的金属板, 易碎的容器需要更多的支撑, 成捆吊管或抽油杆, 等.


同时以高度创新而闻名 吊具吊臂, there are several significant uses of these lifting solutions, as they provide secure load lifting with precise handling. 这里是一个广义的列表 multilift梁“工业效用;

  •  电池起重solutionr
  •  石油和天然气钻井平台等能源公司
  •  化学工业公司
  •  龙门式系统
  •  液压钻机装配工具
  •  货运及运输业
  • 船厂升降梁
  • 建设多点梁


  •  码头和夹层
  •  石油钻塔和其他海洋应用
  •  建筑工地


是否用作 钻机起吊梁 或者一个 船舶起吊梁, the multilift is designed as a low height lifting solution, facilitating a variety of uses. 取决于客户的需求, they are available in welted or bolted structural design- the bolt edition comes with a particular assembly with shackle lugs. Each piece is safeguarded with a durable abrasion resistant two-part epoxy finish, in safety yellow with high gloss for maximum visibility.

What Are the Differences Between Spreader and 提升 Beams?

在订购 吊具杆升降梁 或者一个 多提振梁, it is important to understand the difference between the two. This comprehension is essential to match the right product with the correct application. 这里有一个快速的忽略;

多功能, 通用的吊梁 是为高空环境而建的吗, especially when the headroom is insufficient for top rigging action. 根据 多点机框架 支持能力, they are rather larger than spread 梁 in order to handle higher weight pressure with more precision. 此外, lifting 梁 are specified for when the lifting situation is located indoors and calls f或者一个 low height solution. 在 多点吊车梁, there are rectangular shapes with various lifting points and single rod 梁 that offer all-in-line hoisting. 这些横梁不包括上吊索. 而不是, the design facilitates lifting with crane hook 附件, which directly is connected to a solid lug atop.

相比之下, 提升撑杆/梁 are smaller; some are used for top rigging function as well, but the laid capacity is significantly lower than the 梁. 不像 the multi lift with lower headroom lifting capability, beam 机框架 相当高. 此外, 可调结构梁 is designed with slings that sustain the lifting process. Spread 梁 are designed with lifting points that are known as 可调平压机. It means that the operator can reposition them to accommodate a certain lifting situation.


Contact our team of experts at RAAH Safety for further details on available 吊车梁加载的模型和精确的光束尺寸. 除了巴黎人贵宾厅的标准型号, we can arrange for customized editions that match your exact requirements; for instance, if you have specific requirements for lifting situations that are exceptionally lower than standard. This may be applied for including spare parts in your package, 可选择焊接或螺栓设计, 还有一个关于批量订货的问题.